Specification

www.rainbird.com/drip
159
www.rainbird.com
Drip Irrigation
Designed specifically for areas with water restrictions, our Spray-to-Drip Retrofit Kit allows use of existing 1800 Series Spray Bodies as drip irrigation
connection points.
Landscape Drip
Spray-to-Drip Retrofit Kit
Elbow and Tee Fittings fittings
(½” FTP x barb)
• ½” MPT Swivel Outlet
• 30 PSI Pressure
Regulator
• 200 Mesh Filter
• Rugged, UV Resistant
1800 Body
Features
• Permits convenient conversion to drip tubing when used with barbed
adapter
• Provides 30 psi (2,0 Bars) pressure regulation and a 200-mesh (75
micron) screen that is easily accessible
• Supports ow rates of 0.5 to 6 gpm
• Internal assembly drops into 1804 spray head bodies to easily retrot
existing system to Xerigation® products
• Comes with 1 low prole Barb Tee and 1 Elbow Fitting
• Includes (1) ½” FPT x Elbow Fitting and (1) ½” FPT x Tee Fitting for easy
connection to drip tubing
Model# XCHPS
Can be used to cap
o unused Hunter
Spray bodies.
(Sold seperately)
Model# XCT570
Can be used to cap
o unused Toro
Spray bodies.
(Sold seperately)
Model# 1800XC
Can be used to cap
o unused Rain Bird
1800 Series spray bodies.
(Sold seperately)
Spray-to-Drip Conversion Steps
1
3
2
4
Spray-to-Drip Retrofit Kit
Simple kit that easily converts a conventional spray zone to a
low-volume irrigation zone
Operating Range
• Flow: 0.5 to 6 gpm
(0.11 to 1.36 l/m)
• Inlet pressure: 15 to 70 psi
(1.0 to 4.8 bar)
• Regulated pressure: 30 psi
(2.1 bar)
• Filtration: 200 mesh
(75 micron)
Model
• 1800-RETRO
Dimensions
• ½" (15/21) female-threaded inlet
• ½" (15/21) male-threaded swivel
outlet
• •Width:
- Cap: 2.25” (5.70 cm)
- Body: 1.5” (3.80cm)
Replacement Screen
• RBY-200SSMX (200 mesh stainless
steel screen)