Specification

www.rainbird.com/drip
133
www.rainbird.com
Drip Irrigation
Landscape Drip
XF Series Dripline
XFS-CV Dripline with Heavy-Duty
Check Valve
Rain Bird® XFS-CV Dripline with an improved 4.3 psi check valve delivers
10 feet of hold-back – the highest in the industry.
With pure copper chips in every emitter to protect against emitter
root intrusion, XFS-CV dripline is an all-in-one dripline suitable for any
application – on-surface, sub-surface, sloped or level-grade.
When used in applications where elevation changes exist, the
patent-pending check valve keeps the dripline charged with water,
delivering better irrigation uniformity while preventing over-watering and
puddling at the low-point in the zone.
It accepts Rain Bird XF Dripline Barbed Insert Fittings, RB 600 Series Twist
Lock Fittings, and other 17 mm barbed insert ttings.
A proprietary tubing material makes the XFS Sub-Surface Dripline with
Copper Shield the most exible tubing in the industry, and the easiest
sub-surface dripline to design with and install.
Features
Simple
• Rain Bird’s patent-pending 4.3 psi check valve technology keeps
the dripline charged with water at all times, increasing uniformity of
watering, and conserves water by eliminating the need to recharge the
line at the beginning of each watering cycle
• XFS-CV Sub-Surface Dripline emitters are protected from root intrusion
by Rain Bird’s patent-pending Copper Shield™ Technology resulting in a
system that does not require maintenance or replacement of chemicals to
prevent root intrusion• Through the use of a proprietary tubing material,
the XFS-CV Dripline with heavy-duty check valve is the most exible
dripline tubing in the industry, making it the easiest dripline to design
with and install
• Rain Bird’s low-prole emitter design reduces in-line pressure
loss, allowing longer lateral runs, simplifying design and reducing
installation time
• Variety of standard emitter ow rates, emitter spacing and coil lengths
provide design exibility for sub-surface and on-surface areas with or
without elevation changes
Made with Recycled Content
• All Rain Bird XF Dripline (XFD, XFS, XFCV, XFS-CV) qualify for LEED credit
4.2 because they contain at least 20% Polyethylene post consumer
recycled material by cost. These come in an assortment of coil sizes,
ow rates and emitter spacing
Reliable
• The pressure-compensating emitter design provides a consistent ow
over the entire lateral length ensuring higher uniformity for increased
reliability in the pressure range of 20 to 60 psi
Durable
• Dual-layered tubing (copper over black) provides unmatched resistance
to chemicals, algae growth and UV damage
Grit Tolerant
• Rain Bird’s proprietary emitter design resists clogging by use of an extra
wide ow path combined with a self-ushing action
XFS-CV - 06 - 12 - 100
Model
XFS-CV
Dripline
with
Heavy-Duty
Check Valve
Flow Rate
04 = .42 gph (1.6 l/h)
06 = .61 gph (2.3 l/h)
09 = .92 gph (3.5 l/h)
Emitter Spacing
12 = 12" (30.5 cm)
18 = 18" (45.7 cm)
Length of Tubing
100 = 100' (30.5 m)
250 = 250' (76.2 m)
500 = 500' (152.4 m)
XFS-CV Dripline for Elevated Applications
NEW
10
'
How to Specify
With XFS-CV's built-in 4.3 check valve, all lines are kept
charged and up to 10 feet of water is held back