Specification
Table Of Contents
- Drip Irrigation
- Major Products
- Landscape Drip System Overview
- Xeri-Bug Emitters
- Multi-Outlet Xeri-Bug
- 6 Outlet Manifold - EMT-6Xeri
- 1⁄4" Self-Piercing Barb Connector
- ½” FPT x Barb Grey Transfer Fitting
- Xeri-Bird 8-Outlet Emission Device
- Pressure-Compensating Modules
- SQ Series, Square Pattern Nozzles
- Xeri-Pop Micro-Spray
- Xeri-Bubblers
- Xeri-Sprays and Misters
- Xeri-Spray 360° True Spray
- Diffuser Bug Cap
- Universal 1⁄4" Tubing Stake
- PC Diffuser Cap
- 1⁄4" Tubing Stake with Cap
- 12" PolyFlex Riser
- PolyFlex Riser and Stake Assembly
- PolyFlex Riser and Adapter Assemblies
- Riser Stake-Threaded
- 10-32 Thread Adapter
- 1800 Xeri-Bubbler Adapter
- RWS (Root Watering System)
- Dripline and Blank Tubing Overview
- XFD On-Surface Dripline
- XFCV Dripline with Check Valve
- XFS Sub-Surface Dripline with Copper Shield Technology
- XFS-CV Dripline with Heavy-Duty Check Valve
- QF Dripline Header
- Twist Lock Fittings
- XF Dripline Insert Fittings
- Easy Fit Compression Fitting System
- XF Insertion Tool
- Air/Vacuum Relief Valve Kit
- Drip System Operation Indicator
- XT-700 Distribution Tubing
- XF Series Blank Tubing
- XBS - Black Stripe Tubing
- XQ ¼" Distribution Tubing
- 1⁄4" Landscape Dripline
- 1⁄4" Barb Transfer Fittings
- Galvanized Tie-Down Stake
- Subterranean Emitter Box
- Tubing Goof Plug
- Tubing Cutter
- Control Zone Kit Selection Guide
- Control Zone Selection Chart
- Low Flow Control Zone Kits with PR Filter
- Low Flow Control Zone Kits with Anti-Siphon Valve and PR Filter
- Medium Flow Control Zone Kits with Anti-Siphon Valve and PR Filter
- Medium Flow Control Zone Kits with PR Filter
- Medium Flow Control Zone Kits with PR Filter
- Wide Flow Commercial Control Zone Kit with Pressure Regulating, Basket Filter
- Wide Flow Commercial Control Zone Kit with Scrubber Valve & Pressure Regulating, Basket Filter
- High Flow Commercial Control Zone Kit with 2 Pressure Regulating, Basket Filters
- 1.5" Inline Commercial Control Zone Kit
- Low Flow Valves
- Inline RBY Filter
- Pressure-Regulating Filter (RBY)
- Quick-Check Basket Filter
- Inline Pressure Regulators
- Retrofit Pressure Regulators
- 1" & 1½ " High Flow Inline Pressure Regulators
- Pressure Regulating, and Quick-Check Pressure Regulating Basket Filters
- Large-Capacity Filters
- Spray-to-Drip Retrofit Kit
120
The Intelligent Use of Water.
™
Drip Irrigation
Landscape Drip
Emission Devices
120
Xeri-Pop
™
Micro-Spray
The Xeri-Pop
™
Micro-Spray Makes It Easy to Integrate a Durable Micro-
Spray into a Low-Volume Irrigation Design
Features
• The only pop-up spray that works in low-volume low-pressure
application, and this is the perfect solution to vandal-prone areas
• Xeri-Pops can be installed and located in nearly any location and are
ideal for small, odd-shaped planting beds; the 12" version is perfect for
annual ower beds
• Xeri-Pops work with Rain Bird 5' and 8' MPR nozzles and
SQ Series Nozzles — nozzles with square spray patterns and adjustable
throws of 2.5' and 4'
• The Xeri-Pop can operate with 20 to 50 psi base pressure when water is
supplied via
1
⁄4" Distribution Tubing (XQ)
• The exibility of
1
⁄4" tubing allows the Xeri-Pop to be easily located and
relocated as planting conditions dictate
• A durable, plastic snap-collar (on 4" and 6" models) secures the
1
⁄4"
tubing to the outside of the Xeri-Pop case
• The Xeri-Pop’s
1
⁄4" Distribution Tubing can readily connect to
1
⁄2" or
3
⁄4" polyethylene tubing or to a multi-outlet manifold (EMT-6XERI).
Connections to polyethylene tubing are accomplished with either an
SPB-025
1
⁄4" Self-piercing barb Connector or an XBF1CONN
1
⁄4" barb
Connector
• External parts are UV-resistant and available in 4", 6" and 12" pop up
heights
Operating Range
• Pressure: 20 to 50 psi (1.4 to 3.5 bar)
• Filtration: Depends on nozzle used with Xeri-Pop
Models
• XP-400X: 4-inch pop-up
• XP-600X: 6-inch pop-up
• XP-1200X: 12-inch pop-up
Nozzle Options
• SQ Series Nozzles (page 118)
• 5 Series MPR Nozzle (all congurations)
• 5 Series Plastic Bubbler
• 8 Series MPR Nozzle (8H, 8T and 8Q)
XP-1200X
1
⁄4" distribution
tube inlet
1
⁄4" distribution
tube snap collar
XP-600X
XP - 600X
Model
Xeri-Pop
Pop-Up Height
400X = 4" Pop-up
600X = 6" Pop-up
1200X = 12" Pop-up
Always install a PCS-010, -020, 030, or -040
Pressure-Compensating Screen whenever a
5B Bubbler Nozzle is installed on a Xeri-Pop.
XP-400X
Installing the Xeri-Pop in 4 Easy Steps
How to Specify