Specification

118
The Intelligent Use of Water.
™
Drip Irrigation
Landscape Drip
Emission Devices
118
Can be used on…
The SQ Nozzle is an ideal solution for a wide range of difficult-to-design areas,
thanks to its compatibility with popular irrigation products.
1800® Series
Spray Heads
Xeri-Pop
Spray Heads
Polyflex
Risers
Schedule 80
Risers
SQ Series, Square Pattern Nozzles
The Most Precise and Efficient, Low-Volume Spray Solution
for Irrigation of Small Areas with Dense Plantings
Features
• Square spray pattern and pressure compensation oer increased
eciency and control, reducing overspray, property damage and
liability
• Simplify design and installation with the exibility of applications: one
nozzle throws 2.5' or 4' (0.8 m or 1.2 m) and can be used on a variety of
spray heads and risers
• Meets micro irrigation system requirement for less than 26 gph ow
rate at 30 psi
• Square spray pattern with edge-to-edge coverage allows you to easily
design and install in small spaces
• Pressure compensation design delivers uniform ow over the pressure
range
• Available in 3 models—quarter, half and full patterns with matched
precipitation rate
- Virtually no-mist performance from 20 psi to 50 psi
- Two throw distances in each nozzle. One simple click adjusts to 2.5'
or 4' (0.8 m or 1.2 m)
- Shipped with blue lter screen (0.02" x 0.02") to maintain precise
distance of ow, and to prevent clogging
• Compatible with all 1800 Sprays, Xeri-Pops, New PolyFlex Riser Adapter,
UNI-Spray and SCH 80 risers
Operating Range
• Pressure: 20 to 50 psi (1.4 to 3.5 bar)
• Flow rates: 6, 12 and 24 gph (22.7, 45.4 and 90.8 l/h)
• Required ltration: 40 mesh
Models
• SQ-QTR: SQ Nozzle, quarter pattern (Purple)
• SQ-HLF: SQ Nozzle, half pattern (Brown)
• SQ-FUL: SQ Nozzle, full pattern (Red)
• SQ-ADP: SQ PolyFlex Riser Adapter only
• SQ-ADP12: SQ Nozzle Adapter with 12" PolyFlex Riser
• SQ-ADP24: SQ Nozzle Adapter with 24" PolyFlex Riser
* Note: A PA-8S Plastic Shrub Adapter (see page 10) is needed when using an SQ Series Nozzle
mounted on a SCH 80 riser.
SQ Nozzles with Screens
SQ Nozzle Installed on PolyFlex Riser
with Nozzle Adapter
One Nozzle…Two Throws
With a simple turn of the nozzle to the next
preset stop, the Rain Bird SQ Nozzle adjusts from
a 2.5' (0.8 m) throw to a 4' (1.2 m) throw. It’s like
having two nozzles in one.
SQ-QTR SQ-HLF SQ-FUL