Instruction manual

32
Command name Command Function Additional comments
Set the base unit
to answer incoming 672* • Allows the radio to transmit The handheld unit will not ring when the
telephone calls commands to the base unit. base unit receives an incoming telephone call.
• Sets the base unit to answer
remote telephone calls which If a telephone call is connected to the same line
allows the user to operate the as the base unit, the telephone will ring once,
Maxicom
2
system by remote then the base unit will answer the call. The
telephone. telephone will remain operational while the
• Allows outgoing calls from base unit receives the call.
the radio.
Disable remote
telephone calls 674* • Allows the radio to transmit This command prevents the base unit from
to the base unit commands to the base unit. answering incoming telephone calls, therefore
• Allows outgoing telephone calls it prevents operation of the Maxicom
2
by
from the radio. remote telephone.
• Allows normal operation of the
telephone connected to the Important:
same line as the base unit (if To control Maxicom
2
from a remote server,
applicable to your particular enter the 672* command when you finish
base unit configuration). with the 674* mode. If you forget to do
this, you can “call in.” Let the telephone ring
30 times and the base unit will answer the call.
This does not change the mode, however. You
still must enter the 672* command to change
the mode.
Reset the base unit
to its normal 676* • Returns all features and options
(start-up) mode to the default settings (the same
settings as the start-up mode).
• Terminates any action in progress
(including a telephone connection)
and reverts to the start-up mode.
Forward a call from
the base unit to 679* • Allows the base unit to forward This command must be sent via telephone after
the radio. a call it has already answered the base unit answers the call.
to the radio.
• Enables the caller and the radio
user to speak directly to each
other.