Instruction manual

Using the Freedom System

Commands used to control Maxicom

features

For the following commands listed in the table below:

• t = hour(s)

SSS = site(s)

• SSS can be 1, 2, or 3 digits.

• Anything in brackets { } is optional and unlimited in length.

Command name Format Description Examples

Command 1

Set site(s) to auto-on ##1{#SSS...}## Sets site(s) SSS to auto-on. ##1#3#5#11#15##

Sets sites 3, 5, 11, and 15 to auto-on. If no

sites are entered, then all sites are set to

auto-on. Therefore, ##1## turns on all sites.

Command 2

Set site(s) to rain shut-down ##2{#SSS...}## Sets site(s) SSS to rain shut-down. ##2#19#25##

Sets sites 19 and 25 to rain shut-down. If no

sites are entered, all sites are set to rain shut-

down. Therefore, #2# sets all sites to rain

shut-down.

Command 6

Temporarily open or ##6#1#t## Opens the Freedom Time Window ##6#1#5##

close the Freedom for t hour(s). If t is not specified, Opens the Freedom Time Window for the next

Time Window the window stays open for one five hours, regardless of the closing time set in

hour. Maxicom

. All passwords can access the

system during this time period.

##6#2#t## Closes the Freedom Time Window ##6#2##

for t hour(s). If t is not specified, Closes the Freedom Time Window until the

the window stays closed until master password reopens the window.

someone uses the master password

to re-open the window.