Product Brochure

D39659
1 FINISH GRADE/TOP OF MULCH
2 POP-UP SPRAY SPRINKLER
3 SWING ASSEMBLY
RAIN BIRD MODEL SA 6050
4 PVC LATERAL PIPE
5 PVC SCH 40 TEE OR ELL
1 FINISH GRADE
2 ROTOR POP-UP SPRINKLER
3 SWING ASSEMBLY
RAIN BIRD MODEL SA 127575
4 PVC LATERAL PIPE
5 PVC SCH 40 TEE OR ELL
NOTE: A SWING ASSEMBLY MAY BE USED WITH FLOWS LESS THAN 8 GPM
SA Series – Swing Assemblies
The Swing Assemblies shall be used as a
exible swing joint assembly for 1/2” (1,3 cm)
and 3/4” (1,9 cm) inlet sprinklers.
The pipe shall be exible black tubing
constructed of linear low density
polyethylene material. The tubing shall have
a wall thickness of 0.090”. It shall have an
inside diameter of 0.490”. The ttings shall be
constructed of UV-resistant, thermoplastic
material. The model and logo shall be along
the length of the tubing.
The Swing Assembly shall have an operating
pressure rating of 80 psi at 110° F (5,5 bar at
43° C). The Swing Assembly shall be
manufactured by Rain Bird Corporation,
Glendora, California.
Specifications
®
Registered Trademark of Rain Bird Corporation
© 2008 Rain Bird Corporation 3/08
Rain Bird Corporation
6991 E. Southpoint Road
Tucson, AZ 85706
Phone: [phone]
Fax: [phone]
Rain Bird Technical Services
(800) RAINBIRD (U.S. and Canada)
Rain Bird Corporation
970 West Sierra Madre Avenue
Azusa, CA 91702
Phone: [phone]
Fax: [phone]
Specification Hotline
800-458-3005 (U.S. and Canada)
Rain Bird International, Inc.
P.O. Box 37
Glendora, CA 91740-0037
Phone: [phone]
Fax: [phone]
www.rainbird.com
The Intelligent Use of Water™ -- Visit www.rainbird.com to learn about our efforts