Full Product Manual

10
Options and Special
Features
Delay Watering
Watering schedules can be delayed manually for up to
14 days due to rain or other needs. While Delay Watering
is enabled no scheduled watering will take place for
any zones. The WATER NOW feature can still be used.
After the immediate watering is complete from a
WATER NOW session the Delay Watering feature will
resume for the programmed number of days.

During normal operation, AUTO has been
pressed,
Press and hold the
+
button.
The number 01 will appear on the screen along
with the stop icon which will begin ashing.
This means Delay Watering has been enabled
for 1 day.

To increase or decrease the Delay Watering days
press
+
or
–
.
To turn o Delay Watering press
–
until the days
of delay turns to 0.
After the delay days are completed the watering
schedule will resume.
Copy Zone to Zone
Scheduling information can be copied from one
zone to another zone to speed up programming.

Press the SCHEDULE button.

Press
+
or
–
to select the SUBSEQUENT Zone
number.

Press and hold BACK, then press and release
the SCHEDULE button.
4d Cyclic Days

Press
+
or
–
to select Cyclic Days; then press
NEXT.
NOTE: If any settings for Day Cycle or Start Date
have already been entered for previous zones,
those values will be shown on the display.

Press
+
or
–
to set the desired Day Cycle; then
press NEXT.

Press
+
or
–
to set desired Start Date;
then press NEXT.
NOTE: The Start Date should be the rst day the
zone is to be watered. Only Start Dates that fall
within the selected Day Cycle are available.
REPEAT Steps 1-4 for remaining zones.
DAY
CYCLE
START
DATE