Installation Guide

152
The Intelligent Use of Water.
™
Drip Irrigation
Landscape Drip
Control Zone Components
1.5" Inline Commercial Control Zone Kit
Run Up to 62 gpm for Large Zones
n High Flow Range: Allows for larger drip zone coverage with one control
zone kit, saving labor cost, material cost and installation hassle.
n Low Friction Loss: Allows usage in zones with lower head pressure.
n Fully Assembled: Saves installation labor cost by ensuring all key
components are included and that the direction of flow in individual
components is assembled properly.
n Inline Configuration: Fewer connection points, which fits two kits
instead of just one in a jumbo valve box. Also provides more access for
maintenance and components.
Operating Range
• Flow Range: 15 to 62 gpm (56.8 l/min to 234.69 l/min)
• Inlet Pressure: 15 to 115 psi (1.03 to 7.9 bar)
• Regulated Pressure: 40 psi (2.8 bar)
• Filtration: 120 mesh (130 micron)
• Water Temperature: 33° F up to 110° F (0.5° C to 43° C)
• Ambient Temperature: 33° F up to 125° F (0.5° C to 52° C)
Specifications
Dimensions
• XCZ-150-LCS: 20 3/4" L x 5 3/4" W x 9½" H
• XCZ-150-LCDR: 23½" L x 5 3/4" W x 9½" H
Filtration
• XCZ-150-LCS: 1½" (3.81 cm) Stainless Steel Screen Filter, 120 Mesh
(130 Micron); Surface Area: 42 in
2
(270 cm
2
)
• XCZ-150-LCDR: 1½" (3.81 cm) Disc Filter, 120 Mesh (130 Micron);
Surface Area: 48 in
2
(310 cm
2
)
Valve Type
• XCZ-150-LCS: 1.5" PEB
• XCZ-150-LCDR: 1.5" PESB-R
• Power: 24 VAC 50/60 Hz (cycles/sec) solenoid
• Inrush Current: 0.41A (9.84 VA) at 60Hz
• Holding Current: 0.14A (3.43VA) at 60Hz
• Coil Resistance: 30-39 Ohms
• Two-wire compatible with ESP-LXD Decoders
Models
• XCZ-150-LCS
• XCZ-150-LCDR
Replacement Filters
Disc
• LGFC120MD
Screen
• LGFC120MS
XCZ-150-LCS
XCZ-150-LCDR
2-Wire
Compatible
2-Wire
Compatible
Flow Rate (gpm) XCZ-150-LCS XCZ-150-LCDR
15 3 2
20 3 2
25 3 3
30 5 3
40 6 6
50 11 8
60 15 8
70 16 8
Pressure Loss Characteristics
Flow Rate (l/m) XCZ-150-LCS XCZ-150-LCDR
56.9 0.21 0.14
75.7 0.21 0.14
94.6 0.21 0.21
113.5 0.34 0.21
151.4 0.41 0.41
189.3 0.76 0.55
227.1 1.03 0.55
264.9 1.10 0.55
Pressure Loss Characteristics METRIC
NEW