User Manual

Important
RC-KIT Riser Connection Kit
Existing
Rain Bird 1800
®
spray head or
any 1/2" riser
To ensure proper operation of your Landscape Dripline System, one of the above
water supply connection kits must be used. Both kits include:
• Pressure regulator to avoid excess flow
• Back-flow preventer to stop water from flowing back into your home’s system
• Filter to trap rust and sediment, helping to keep emitters flowing trouble-free
• Easy, leak-proof connections
• Replace an underground
irrigation spray head or mount
on any riser
• Sized for easy conversion of a
Rain Bird
®
1806 pop-up spray
head
• Also connects to other stan-
dard 1/2” irrigation fittings
• All-in-one unit includes filter,
30psi regulator and swivel tee
Minimum operating pressure for a drip system is 15psi, maximum is 25-30 psi. The FCKIT and RCKIT each contain a 25-30 psi
regulator to reduce higher pressures. These connection kits also incorporate a 150-200 mesh filter to protect the tubing emitters.
CAUTION: Not using the pressure regulator and filter may damage your system.
The faster, smarter way to drip irrigate
CUT &
CONNECT
If You Have...
You Need...
Ground Level
/2" Riser
RB5423-6 LD POP Flip Book Tabs 3/1/05 5:24 PM Page 4