Operating instructions

RailKing F-3 Diesel Engine

Connecting the Transformer

The Z-750

power supply included with this set provides an easy-to-use,

safe power source for most AC-powered trains and accessories.

Plug the wire from the transformer into the remote lock-on’s center port,

marked “Power,” then plug the transformer into the wall outlet. Insert two

AA batteries (not included) into the remote handheld.

Lubricating the Engine

You must lubricate the engine before operating it. Use a light household oil

and follow the lubrication points marked “L” in Fig. 5 on Page 12. Do not

over oil. Use only a drop or two on each pivot point.

Coupling the Engine and Cars

Our couplers are designed for realistic

operation. Place the engine and cars on the

track and couple them together. If the

coupler is already closed, press down on

the small finger that extends from under

the right side of the coupler to open the

coupler knuckle and allow the couplers to

interlock as shown in Figure 2.

Basic Operation

Push Down on Coupler Finger to

Release Knuckle

Figure 2. Coupling the Passenger

Cars Together