Operator`s manual

10 RailKing R-17 Subway Set
Interior Lights
To replace the interior lights in the
powered unit:
1. Follow the shell removal instructions
found in the “Lubrication and Greasing”
section of this booklet.
2. Pull bulb straight out to remove.
To replace the interior lights in the
unpowered units:
1. Remove the four Phillips screws from the chassis (same as power unit),
then lift the body away from the chassis.
Lift the shell off carefully and turn body
shell over to reveal interior lights.
2. Pull light bulbs straight out and push
new bulbs straight in to replace.
Gently Pull Bulbs
Away From Socket To Remove
Figure 5
Lightbulb Replacement Instructions
Non-Powered Car Chassis & Body
Figure 6
Gently Pull Bulbs
Away From Socket To Remove
Figure 7