Operator`s manual

14 RailKing R-17 Subway Set
Interior Lights
To replace the interior lights in the
powered unit:
1. Follow the shell removal instructions
found in the “Lubrication and Greasing”
section of this booklet.
2. Pull bulb straight out to remove.
( See figure 5)
To replace the interior lights in the
unpowered units:
1. Remove the four Phillips screws from
the chassis (same as power unit), then lift
the body away from the chassis. Lift the
shell off carefully and turn body shell over
to reveal interior lights. (See figure 6)
2. Pull light bulbs straight out and push
new bulbs straight in to replace.
( See figure 7)
Gently Pull Bulbs
Away From Socket To Remove
Figure 5
Lightbulb Replacement Instructions
Non-Powered Car Chassis & Body
Figure 6
Gently Pull Bulbs
Away From Socket To Remove
Figure 7