User guide

ICY BOX Mediaserver User Guide 74
 The second drive is a different size from the original drive. If the second drive is
smaller, it cannot be added to the RAID array. If the second drive is larger, it can
be added to the RAID array, but the additional space will be wasted.
In these cases, the following message will appear.
Click OK, and then navigate to Preferences > RAID.
Adding a used drive
If the drive isn't blank, the ICY BOX Mediaserver Application will display the following
message. Click Yes to delete the data.
Rebuilding RAID
You must rebuild RAID if the Status is Single Disk and the second drive is Unused.
To rebuild RAID, click Rebuild. The ICY BOX Mediaserver will sync the drives by
preparing the second drive and then copying data to it.
Removing a drive
To remove a hard drive, power off the ICY BOX Mediaserver, and then remove the
drive.
You can also remove a drive while the ICY BOX Mediaserver is powered up. Navigate
to Preferences > RAID, and then click the Eject button by the drive. Wait for the disk