User manual

Step 3 Select “Internet Protocol (TCP/IP)” and click “Properties”. A window for IP address

settings will pop up.

Step 4 Conﬁ gure the IP address, subnet mask, gateway and DNS. You can consult with the MIS

personnel in your company for the related IP address.

Step 5 After the conﬁ guration, click “OK” to complete the settings. (If you need to change the IP

address in the future, you should make sure that the IP addresses used by SR5650-4S-U3D

is in the same domain to ensure the proper system operation.)

Step 6 Login the system. The default IP address of SR5650-4S-U3D is 192.168.0.1. Open your

web browser and input:

http://192.168.0.1 or https://192.168.0.1 (using Secure Sockets Layer connection to

transfer data with encryption. Note that data transfer speed will be compromised under this

connection mode)

To use the system for the ﬁ rst time, click any of the functions to pop up the screen requesting for account

and password. The default username and password are as follows:

Default Password: 1234

Click OK to login. Please refer to Chapter 3 for following detailed instructions.