User manual

3.7.4 Log Import & Export
You can click the “Congif import & export” function to import/export the confi gures
3.7.5 Shutdown
After you enter the “Shutdown” function, it will display the “REBOOT” and “SHUTDOWN” buttons. Before
power off, it would be better to press SHUTDOWN to fl ush the data from cache to physical disks. This is
better for the data protection.
3.8 Logout
For security reason, “Logout” function will allow logout while no user is operating the system. When re-
login to the system, please input user name and password again.
3.7.1 Upgrade
You can enter the “Upgrade” function to upgrade fi rmware. Please prepare your new fi rmware fi le named
“xxxx.bin”, then click” to select the fi le. After you click , the system will
automatically start and complete the upgrade.
Figure 3.7.1.1
When upgrading, a status window will appear. After upgrading, the system must reboot.
Remind : If your hardware is working well, there is no need to upgrade the fi rmware as the upgrade may caused abnormal operations.
Upgrade the fi rmware arbitrarily may caused the lost of data and system confi guration, RAIDON Technology Inc. will not
answer to this. If you need to upgrade the fi rmware, please contact with our supporting department via mail supporting@
raidon.com.tw in advance for getting the latest version of the fi rmware.
3.7.2 System Information
You can click the “Info” function to view current system information.
3.7.3 Reset to Default
You can click the “Reset to default” function to restore your system to factory defaults.
56 User Interface Introduction User Interface Introduction 57