User manual
Introduction
About this Manual
Thank you for using the product of RAIDON Technology Inc.
This user manual will introduce the STARDOM SCSI series products and will also give you a brief
understanding of how the RAID operates. The information in the manual has been thoroughly checked
before publication, but may not conform to the product actually delivered. Actual product specifi cations
depend on the product shipped to you. Any update in the specifi cations or product-related information
shall not be subject to further notice. For the latest information on the product, please visit the website at
www.stardom.com.tw or directly consult with your contact window of our sales.
If you have any questions on STARDOM products or need the latest product information, user manual
or fi rmware, please contact us at supporting@raidon.com.tw and we will get back to you as soon as
possible.
Notice: RAIDON Technology Inc. only provides technical support and service to STARDOM direct
customers. For end users or non-direct customers, please contact your distributor for better support and
prompt responses. If your product is not purchased directly from STARDOM, please do not contact us
directly since you may not get any reply.
All the product information in this manual is the property of RAIDON Technology Inc. All rights reserved.
SR7650-4S-U3D Quick Installation Guide
1. Package Contents
After you open the outer package, make sure that the following items are in the box:
• SR7650-4S-U3D product body
• AC Power Cord
• RS-232 Port Cable
• CD
• User Manual
• Accessory Kit
2. Hardware Installation
Please follow the procedure below to complete the hardware installation of SR7650-4S-U3D:
Step 1 Open the outer package and take out the product body. (Make sure the related accessories
and the product body are not damaged or missing. If you have any questions, contact the
distributor or sales)
Step 2 Mount the product to the rack. Make sure that the fan is not blocked and there is appropriate
space around for heat dissipation. (Do not place the product nearby water area or any environment
that may cause damage to the product)
Step 3 Take out the tray and install your hard disk in it. Make sure to fasten the hard disk securing
screws to prevent damages caused by unnecessary movement.