User manual

3.4.4 Login Confi g
Select “Login confi g” to confi gure the time of single login and auto logout. Single login can prevent
multiple users from simultaneously accessing the same data.
1. Auto logout: The options include (1) Disable (2) 5 min (3) 30 min (4) 1 hour. If a user idles after
the specifi ed time elapsed, the system will automatically logout to allow other users to login.
2. Login block: Disable / Enable. When login block is enabled, only one user is allowed to login/change the
system settings.
3.4.5 Password
Click “Password” to change the administrator password.
3.4.6 Date
Click “Date” to confi gure current date and time.(We recommend you confi gure it before using the system
to ensure the time consistency across the system.)
3.4.7 E-Mail
Click “Mail” to input up to 3 E-mail addresses for receiving the event notifi cation. Some mail servers will
check “Mail-from address” and block spam mails. Please fi ll the necessary fi elds and select “Send test
mail” to verify the E-mail notifi cation function works properly.
You can also select which level of the event needs to be notifi ed. Only Error and Warning events will be
sent by default.
3.4.8 Simple Network Management Protocol (SNMP)
Select “SNMP” to confi gure SNMP (Simple Network Management Protocol) trap messages. It allows
up to 3 SNMP trap message addresses. The default community confi gure is “public”. You can select the
types of event log. By default SNMP only sends Info events.
36 User Interface Introduction User Interface Introduction 37