User manual

2.4 System Control
2.4.1 LCM (SR5650)
Use the four function keys, (Up), (Down), ESC (Escape) and ENT (Enter) to control LCM (LCD
Control Module). After booting up the system, the following screen will be displayed:
After pressing ENT (Enter) key, you can use (Up) and (Down) keys to select a LCM function.
If there is any alarm or error message, LCM will show the related information on the screen to provide
users with more information.
Each LCM function is described as follows:
Alarm Mute To turn off the alarm sound when an error occurs
Reset/Shutdown To reset or shutdown the controller
Quick Install
To use “Quick Install” to set up a volume by three steps. Please refer to section 4.3 for confi gure via the web-
based GUI
View IP Setting To view current IP address, subnet mask and gateway
Change IP Confi g
To set up the IP address, subnet mask and gateway. You can choose to use DHCP server (for IP address
allocation) or manually specify the IP address
Reset to Default
To restore factory defaults:
Default Password: 1234
Default IP address: 192.168.0.1
Default subnet mask: 255.255.255.0
Default gateway: 192.168.0.254
xxx.xxx.xxx.xxx
IntelliRAID
LCM architecture reference diagram
STARDOM IntelliRAID
cd
[Alarm Mute]
[cYes Nod]
[Reset/Shutdown]
[Reset]
[cYes Nod]
[Shutdown]
[cYes Nod]
[Quick Install]
RAID 0
(RAID 1/RAID 3/
RAID 5/RAID 6)
xxxxxx MB
Volume Size
(xxxxxx M)
Adjust Volume Size
Apply The Confi g
[cYes Nod]
[View IP Setting]
[IP Confi g]
[Static IP]
[IP Address]
[192.168.000.001]
[IP Subnet Mask]
[255.255.255.0]
[IP Gateway]
[192.168.000.254]
[Change IP Confi g]
[DHCP]
[cYes Nod]
[Static IP]
[IP Address] Adjust IP address
[IP Subnet Mask] Adjust Submask IP
[IP Gateway] Adjust Gateway IP
[Apply IP Setting]
[cYes Nod]
[Reset to Default]
[cYes Nod]
Notice : Before powering off, please execute “Shutdown” to fl ush the data from the cache
2.4.2 System Buzzer
The features of system buzzer are described as follows:
1. The system buzzer will alarm for continuously 1 second when system boots up successfully.
2. The system buzzer will alarm continuously when system failure or error occurs. The alarm can be
stopped using the Alarm Mute option.
3. When the error has been solved, the buzzer will stop automatically.
2.4.3 LED
STARDOM SCSI Series Products feature LED indicators to show the system status. You can use the
indicators to verify if the system is working properly.
28 Installation Installation 29