User manual

Step 4 Conﬁ gure the related settings.

Baud Rate: 115200

Data byte: 8 bite

Parity Check: No

Stop bits: 1

Flow control: No

Step 5 Select the terminal type. Please click File→Properties→Settings. Specify the terminal type as

vt100. Then click OK button to complete the connection.

Step 6 After the connection, input the username and password and then login. The following operations

are similar to the operations via web-based GUI. Please refer to Chapter 3 for instructions.

Default Password: 1234

2.3.3 Remote Control - Secure Shell

SSH (secure shell) allows remote login to STARDOM SCSI Series Products

You can download SSH end user software via the following websites:

SSHWinClient WWW: http://www.ssh.com/

Putty WWW: http://www.chiark.greenend.org.uk/

Host name: 192.168.0.1

Default Password: 1234

Remind : STARDOM SCSI Series Products support SSH for remote control. To use SSH functions, IP address and password are

required for login.

Installation Installation 27