User manual

Q: How to check if the USB ports of your PC are activated.

A: USB is included in Windows 98 and XP/2000/2003; however, some computer

manufacturers may not set up the computer’s USB.

If “New Hardware Wizard” does not show on the screen after you connect the device to

the USB port of the computer, please proceed with the following procedures:

Select “Start” from Windows XP desktop and then select “Control Panel”.

Double click on the “System” icon and then tap “Hardware”.

Click on the “Device Manager” tab.

Click on the “+ (plus)” sign in front of “Universal Serial Bus controllers”.

Click on the “+ (plus)” sign in front of “USB controllers”.

If you identify the USB Universal Host Controllers and USB Root Hubs, it means USB may

be already activated. If there are several USB hubs serially connected, please try to

connect to a different USB hub or to a USB device. Meanwhile, please make sure that the

cable is connected properly. (A USB hub is a hardware device that allows you to connect

to multiple USB cables.)

If you do not identify any of these devices on the screen, please refer to the computer

documents or contact the manufacturer for further detailed information on how to activate

and configure USB.

Frequently Asked Questions