User manual

www.RAIDON.com.tw

Your Data Security Guardian

Chapter 8 Visual Status Indicator Definitions

Chapter 9 Frequently Asked Questions

Q1. Which drive format should I choose to format the hard drives in the GR5630-WSB3+?

A : It depends on the computer system you most often use. See the below suggestions:

1.Use NTFS format for Windows 2000/XP/Vista/Windows 7 system

2.Use HFS+ (Mac OS Extended) format for a Mac OS X system

3.Choose FAT32 format if you’ll use the GR5630 in both Windows and Mac environments

(the maximum size of one single file may not exceed 4 GB).

Q2. Why can’t my GR5630-WSB3+ reach the transfer performance speed of 200 MB/s via

e-SATA interface as stated on your website?

A : 1.Please first check if your PCI-E SATA host adapter would only support PCI-E (1X). This type

of host adapters cannot reach the transfer performance speed beyond 135MB/s.

2.The GR5630-WSB3+ will need to be set to the RAID 0 mode also.

States

Power on

No disk

Disk Fail

RAID Fail

Disk Idle

Format

Access

Fan Fail

Blue

Blue Blue

Blue

Source: Blue flash

Target: Blue and Purple

light on alternatively

1 long when

booting finished

Blue flash

Blue

Power LED Alarm LED

--------

-------- -------- --------

--------

Red

HDD LED

buzzer

4 short

Blue flash => Blue

Front LED

Blue

Over Temp.

Rebuilding