SDS

Page 4/8
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 12.08.2013
Revision: 12.08.2013
Trade name: Raid® Clothing Moth Trap
·
Further information about storage conditions: Keep container tightly sealed.
·
7.3 Specific end use(s) No further relevant information available.
(Contd. of page 3)
8 Exposure controls/personal protection
·
Additional information about design of technical facilities: No further data; see item 7.
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace: Not required.
·
Additional information: The lists valid during the making were used as basis.
·
8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
·
Respiratory protection: Not required.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recomm endation to the glove m aterial can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
· Eye protection:
Contact lenses should not be worn.
Safety glasses
·
Limitation and supervision of exposure into the environment
No further relevant information available.
· Risk management measures
See Section 7 for additional information.
(Contd. on page 5)
36.0.22