RF - Short-travel keyswitches Specifications LED 3 mm LED (valid for 25 °C) Red LED Green LED Yellow LED Max. forward current lF: Current reduction from: T0 = 50 °C: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 30 mA approx 0.5 mA/°C 635 nm 2 V/10 mA 5 V/100 μA min. - 20 °C . . . + 80 °C 30 mA approx 0.5 mA/°C 565 nm 2 V/10 mA 5 V/100 μA min. - 20 °C . . . + 80 °C 20 mA approx 0.2 mA/°C 586 nm 2 V/10 mA 5 V/100 μA min. - 20 °C . . .
RF - Short-travel keyswitches RF 15 - Short-travel keyswitch General Data Low-profile keyboards with RF 15 components should be designed with a 19.05 mm grid. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. Technical Data 4 General information Colour of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 9.
RF - Short-travel keyswitches Force/Travel Diagram – Keyswitch RF 15 Circuit Diagram – Keyswitch RF 15 Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Keyswitch, spot-illuminated Dimensional Drawing RF 15 4 Hole Pattern RF 15 Hole Pattern – Front Panel RF View on component side, all hole diameters 1,1 +/- 0,1 mm PCB Keyswitches 4 - 43
RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, non-illuminated Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated transparent - - 3.14.100.001/0000 Ag not illuminated transparent - - 3.14.100.006/0000 Technical data see page 4 - 42 For keycaps, refer to chapter accessories and system RK 90. If exchangeable legends are required, or if an overall height of 12.5 mm is required, a keycap can be mounted on the non-illuminated keys.
RF - Short-travel keyswitches Overall height RF 15 - Short-travel keyswitch, fully illuminated with 2 LED Illuminated area 10.8 x 10.8 mm Housing Actuator Lens Pict.: red Contact materials Illumination Colour of lens LED colour LED type Order no.
RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, 1 LED spot-illumination Contact materials Illumination Colour of lens LED colour LED type Order no. Au spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED opaque white blue 3 mm 3.14.100.030/0000 opaque white red 3 mm 3.14.100.031/0000 opaque white green 3 mm 3.14.100.
RF - Short-travel keyswitches RF 15 N - Short-travel keyswitch General Data The RF 15N keyswitch provides a minimum overall height of 6.2 mm. The overall height can be varied by extension plungers which are inserted into the cross-like notches on the actuator tops. LEDs can only be arranged separately next to the keyswitches up to an overall height of 10 mm (i.e. without plunger or with small plunger).
RF - Short-travel keyswitches Force/Travel Diagram – Keyswitch RF 15 N Circuit Diagram – Keyswitch RF 15 N Operation characteristic limits RF Keyswitch, non illuminated Keyswitch, spot-illuminated Dimensional Drawings RF 15 N 4 RF PCB Keyswitches 4 - 49
RF - Short-travel keyswitches Hole Patterns – Front Panel RF 15 N RF 15 N without plunger RF 15 N with plunger ø 10 mm, non-illuminated RF 15 N with plunger ø 10 mm, illuminated RF 15 N with plunger ø 15 mm, illuminated 4 Hole Pattern RF 15 N RF View on component side All hole diameters 1.1 +/- 0.
RF - Short-travel keyswitches Typical accessories RF 15 N - Short-travel keyswitch Description Photo Order no. Additional accessories see page RF 15 N - LED spacer Ø 5 mm, spacing length 2.2 mm, light grey, for use with overall height of 12.5 mm 5.30.109.010/0756 4 - 84 RF 15 N - Extension plunger, Ø 10 mm, overall height 22.5 mm 5.46.011.028/0710 4 - 80 RF 15 N - Extension plunger, Ø 15 mm, overall height 22.5 mm 5.46.017.
RF - Short-travel keyswitches RF 15 R - Short-travel keyswitch Pict.: with 2 mm LED, red with 3 mm LED, green General Data The round actuator of the RF 15 R keyswitch requires round front panel cut-outs. These make it possible to use a narrow keyboard grid of only 15.24 mm with sufficiently large frame webs between the individual keys. We recommend area embossing over the actuators for the overlay. Technical Data 4 General information Recommended key grid 15.
RF - Short-travel keyswitches Force/Travel Diagram – Keyswitch RF 15 R Circuit Diagram – Keyswitch RF 15 R Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, spot-illuminated Dimensional Drawing RF 15 R 4 Hole Pattern RF 15 R RF View on component side All hole diameters 1.1 +/- 0.
RF - Short-travel keyswitches Hole Pattern – Front Panel RF 15 R RF 15 R, non-illuminated RF 15 R, illuminated 4 RF 4 - 54 PCB Keyswitches
RF - Short-travel keyswitches Overall height RF 15 R - Low short-travel keyswitch, non-illuminated Contact materials Overall height Illumination LED type LED colour Order no. Au 9.7 mm not illuminated - - 3.14.100.501/0000 Ag 9.7 mm not illuminated - - 3.14.100.506/0000 Technical data see page 4 - 52 RF 15 R - High short-travel keyswitch, non-illuminated 4 Contact materials Overall height Illumination LED type LED colour Order no. Au 12.5 mm not illuminated - - 3.14.100.
RF - Short-travel keyswitches RF 15/19 - Special accessories Pict.: opaque light grey round and triangular versions Technical Data Dimensions Length Width see order block see order block Overall height Diameter Colour see order block see order block see order block RF 15 N - Extension plunger, round head Pict.: opaque light grey 4 RF Length Width Overall height Diameter Colour Order no. - - 9 mm 10 mm - 5.46.011.036/0710 - - 9.7 mm 10 mm - 5.46.011.030/0710 - - 12.