RAFIX 22 QR 2 General data RAFIX 22QR control component range • For a mounting hole diameter of 22.3 mm to IEC 60947 • 250V/10A max. • Water-jet proof IP65 • 2 collar shapes • The lamps of the pushbuttons can also be replaced from the front • The contact blocks (silver or gold contacts) snap onto the actuators with a coupling • Screw, cage clamp, quick connect terminals or RJ12 connector • 3 NC + 3 NO max.
RAFIX 22 QR 2 RAFIX 22 QR RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418 RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418 RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, with indication to EN 60947-1 RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, with keylock RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, illuminated RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, illuminated 2 - 110 2 - 111 2 - 112 2 - 112 2 - 113 2 - 113 RA
RAFIX 22 QR Contact blocks marked with different colours for ease of identification in stock and when connecting. • NC contacts: red • NO contacts: green • NC/NO contacts: red/green • Lamp socket: black • Silver contacts: basic housing colour is black • Gold contacts: basic housing colour is grey • The terminals associated with a contact pair are colour coded on the connection side and marked with the respective contact numbers.
RAFIX 22 QR 2 Terminals Assembly The RAFIX 22 QR contact blocks are available in different connection styles as required for your application: • Screw terminals The terminals are open and the captive screws are mounted in the terminal recess. • Quick connect/solder terminals 6.3 x 0.8 mm • Cage clamp terminals Simply insert a screwdriver to open the terminal, insert the cable and remove the screwdriver to close the terminal. • RJ 12-terminal Just plug in the cable with a RJ 12 connector.
RAFIX 22 QR The RAFIX 22 QR control component range meets all the technical requirements and current standards for control units. The system is of modular design. Actuators, contact blocks and lamp sockets can be combined freely. This means that you may implement modifications of design or configuration even at the last minute. An additional positive effect is the reduction of stockholding costs.
RAFIX 22 QR RAFIX 22 QR pushbutton Pict.: transparent green 2 Panel cut-out to IEC 60947-5-1 Technical data General information Form of lens Colour of lens Colout of front ring Form of collar RAFIX 22 QR with contact block Operating force max. see order block see order block see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth with contact block without cable Mounting hole Key grid Diameter of collar 56.4 mm 22.
RAFIX 22 QR Accessories RAFIX 22 QR pushbutton Description Photo Order no. Page Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 23 Label holder, round collar, with adhesive tape and release liner on back 5.07.620.010/0000 2 - 143 For other contact blocks, refer to the chapter „Contact blocks“; for additional accessories, refer to „RAFIX 22 QR special accessories“. RAFIX 22 QR pushbutton, flush lens, round collar 2 29.80 21.80 M22x1.5 1...6mm 22.90 9.40 Pict.
RAFIX 22 QR RAFIX 22 QR pushbutton, protruding lens, round collar 29.80 22.00 M22x1.5 1...6mm 22.90 12.45 Pict.: transparent red Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens 2 RAFIX 22 QR Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.240.201/10xx 1.30.240.221/1000 1.30.240.211/10xx 1.30.240.231/1000 yes transparent red 1.30.240.201/13xx 1.30.240.221/1300 1.30.240.
RAFIX 22 QR RAFIX 22 QR pushbutton, protruding front ring, round collar 24.30 29.80 M22x1.5 1...6mm 22.90 12.60 Pict.: transparent red Illuminability Colour of lens Panel cut-out to IEC 60947-5-1 Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.240.401/10xx 1.30.240.421/1000 - - yes transparent red 1.30.240.401/13xx 1.30.240.421/1300 - - yes transparent yellow 1.30.240.401/14xx 1.
RAFIX 22 QR RAFIX 22 QR pushbutton, flush lens, square collar 29.80 21.80 M22x1.5 1...6mm 22.90 9.40 Pict.: transparent red Illuminability Colour of lens 2 RAFIX 22 QR Order no. momentary Panel cut-out to IEC 60947-5-1 Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.240.051/10xx 1.30.240.071/1000 1.30.240.061/10xx 1.30.240.081/1000 yes transparent red 1.30.240.051/13xx 1.30.240.071/1300 1.30.240.
RAFIX 22 QR RAFIX 22 QR pushbutton, protruding lens, square collar 29.80 22.00 M22x1.5 1...6mm 22.90 12.45 Pict.: transparent red Illuminability Colour of lens Panel cut-out to IEC 60947-5-1 Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.240.251/10xx 1.30.240.271/1000 1.30.240.261/10xx 1.30.240.281/1000 yes transparent red 1.30.240.251/13xx 1.30.240.271/1300 1.30.240.261/13xx 1.30.
RAFIX 22 QR RAFIX 22 QR pushbutton, protruding front ring, square collar 24.30 29.80 M22x1.5 1...6mm 22.90 12.60 Pict.: transparent green Illuminability Colour of lens 2 RAFIX 22 QR Panel cut-out to IEC 60947-5-1 Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.240.451/10xx 1.30.240.471/1000 - - yes transparent red 1.30.240.451/13xx 1.30.240.471/1300 - - yes transparent yellow 1.
RAFIX 22 QR RAFIX 22 QR selector switch Pict.: Front ring, black, non-illuminated 2 Front ring, metallized, illuminated Panel cut-out to IEC 60947-5-1 General data The illuminated selector switches are provided with translucent handle markings. These are opaque on the non-illuminated versions.
RAFIX 22 QR Accessories RAFIX 22 QR selector switch Description Photo Order no. Label holder, round collar, with adhesive tape and release liner on back Page 5.07.620.010/0000 2 - 143 For other contact blocks, refer to the chapter „Contact blocks“; for additional accessories, refer to „RAFIX 22 QR special accessories“. RAFIX 22 QR selector switch, round collar, short handle 2 Pict.
RAFIX 22 QR RAFIX 22 QR selector switch, round collar, long handle 29.80 M 22x1.5 1...6 9.10 22.90 22.20 Pict.: Front ring, metallized, illuminated Illuminability Contact function 2 RAFIX 22 QR Panel cut-out to IEC 60947-5-1 Rotating angle Rotating angle Order no. Plastic front ring Metal front ring no momentary 1 x 40° 1Ö + 1S 1.30.242.511/02xx 1.30.242.512/0200 no momentary 2 x 40° 1Ö + 1S 1.30.242.536/02xx 1.30.242.537/0200 no latching 1 x 90°, form L 1Ö + 1S 1.30.242.
RAFIX 22 QR RAFIX 22 QR selector switch, square collar, short handle Pict.: Front ring, red, non-illuminated Illuminability Contact function Panel cut-out to IEC 60947-5-1 Rotating angle Rotating angle Order no. Plastic front ring Metal front ring no momentary 1 x 40° 1Ö + 1S 1.30.242.551/02xx 1.30.242.552/0200 no momentary 2 x 40° 1Ö + 1S 1.30.242.576/02xx 1.30.242.577/0200 no latching 1 x 90°, form L 1Ö + 1S 1.30.242.651/02xx 1.30.242.
RAFIX 22 QR RAFIX 22 QR selector switch, square collar, long handle Pict.: Front ring, black, non-illuminated Illuminability Contact function 2 RAFIX 22 QR Panel cut-out to IEC 60947-5-1 Rotating angle Rotating angle Order no. Plastic front ring Metal front ring no momentary 1 x 40° 1Ö + 1S 1.30.242.561/02xx 1.30.242.562/0200 no momentary 2 x 40° 1Ö + 1S 1.30.242.586/02xx 1.30.242.587/0200 no latching 1 x 90°, form L 1Ö + 1S 1.30.242.661/02xx 1.30.242.
RAFIX 22 QR RAFIX 22 QR keylock switch Pict.
RAFIX 22 QR RAFIX 22 QR keylock switch, round collar Pict.: Front ring, metallized Contact function Rotating angle Panel cut-out to IEC 60947-5-1 Key removal position Rotating angle Order no. Plastic front ring Metal front ring momentary 1 x 40° 0 1Ö + 1S 1.30.245.001/xxxx 1.30.245.002/0000 momentary 2 x 40° 0 1Ö + 1S 1.30.245.101/xxxx 1.30.245.102/0000 latching 1 x 90°, form L 0 1Ö + 1S 1.30.245.201/xxxx 1.30.245.202/0000 latching 1 x 90°, form L 0+1 1Ö + 1S 1.30.245.
RAFIX 22 QR RAFIX 22 QR keylock switch, square collar Pict.: Front ring, metallized Contact function 2 RAFIX 22 QR Rotating angle Panel cut-out to IEC 60947-5-1 Key removal position Rotating angle Order no. Plastic front ring Metal front ring momentary 1 x 40° 0 1Ö + 1S 1.30.245.051/xxxx 1.30.245.052/0000 momentary 2 x 40° 0 1Ö + 1S 1.30.245.151/xxxx 1.30.245.152/0000 latching 1 x 90°, form L 0 1Ö + 1S 1.30.245.251/xxxx 1.30.245.
RAFIX 22 QR RAFIX 22 QR mushroom-headed pushbutton Pict.: Front ring, metallized 2 Panel cut-out to IEC 60947-5-1 Technical data General information Actuator Colour of mushroom Colout of front ring Form of collar RAFIX 22 QR Front ring, slate grey Mechanical characteristics Operating force max.
RAFIX 22 QR RAFIX 22 QR mushroom-headed pushbutton 40 mm, round collar Pict.: Front ring, metallized Illuminability Colour of mushroom Panel cut-out to IEC 60947-5-1 Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring no opaque black 1.30.246.501/01xx 1.30.246.502/0100 1.30.246.511/01xx 1.30.246.512/0100 no opaque red 1.30.246.501/03xx 1.30.246.502/0300 1.30.246.511/03xx 1.30.246.
RAFIX 22 QR RAFIX 22 QR mushroom-headed pushbutton 60 mm, round collar Pict.: Front ring, metallized Illuminability Colour of mushroom no 2 opaque red Panel cut-out to IEC 60947-5-1 Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring 1.30.246.601/03xx 1.30.246.
RAFIX 22 QR RAFIX 22 QR mushroom-headed pushbutton 40 mm, illuminated, square collar Pict.: Front ring, slate grey Illuminability Colour of mushroom yes opaque red/ transparent red Panel cut-out to IEC 60947-5-1 Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring 1.30.246.051/03xx 1.30.246.052/0300 1.30.246.061/03xx 1.30.246.
RAFIX 22 QR RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418 Panel cut-out to IEC 60947-5-1 2 General data The emergency stop pushbuttons comply with IEC 60 204, IEC 60 073, IEC 60 947 and VDE 0113 Part 1. They are designed dupe-proof according to EN 418 with a positive mechanical movement sequence. A certain operating force must be exerted at the action point in order to prevent inadvertent operation.The pushbutton latches when pressed.
RAFIX 22 QR Accessories RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418 Description Photo Order no. Page Emergency stop label, yellow, round 60 mm, PVC adhesive, without legend 5.76.204.100/0400 2 - 146 Emergency stop label, yellow, round 60 mm, PVC adhesive, with legend „NOT-AUS“ 5.76.204.101/0400 2 - 146 Emergency stop label, yellow, round 60 mm, PVC adhesive, with legend „ARRET D’URGENCE“ 5.76.204.
RAFIX 22 QR RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, with indication to EN 60947-1 Panel cut-out to IEC 60947-5-1 2 Degree of protection Reset from front side Colour of mushroom Illuminability Operating life Order no. IP65 opaque red 100000 1.30.243.601/0300 by clockwise rotation no Technical data see page 2 - 110 Included: Ring nut with claw. Switching position indication: In the non-operated condition, a green ring is visible on the side.
RAFIX 22 QR RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, illuminated Panel cut-out to IEC 60947-5-1 Degree of protection Reset from front side Colour of mushroom Illuminability Operating life Order no. IP65 opaque red/ translucent red 100000 1.30.243.001/0300 by clockwise rotation yes 2 Technical data see page 2 - 110 Included: Ring nut with claw. Switching position indication: In the non-operated condition, a green ring is visible on the side.
RAFIX 22 QR RAFIX 22 QR toggle switch Ø/ M 22 x1 29.80 1 ... 6mm 22.70 9.40 ca. 22.20 Pict.: Front ring, metallized 2 RAFIX 22 QR Panel cut-out to IEC 60947-5-1 Technical data General information Form of lens Colour of toggle Front ring Form of collar toggle opaque white see order block see order block Dimensions Length of collar Witdth of collar Overall height Mounting depth Mounting hole see order block see order block 22 mm 56.4 mm 22.
RAFIX 22 QR NEW RAFIX 22 QR, toggle switch, round collar Ø/ M 22 x1 29.80 1 ... 6mm 22.70 9.40 ca. 22.20 Pict.: Front ring, slate grey Panel cut-out to IEC 60947-5-1 Illuminability Colour of toggle no opaque white Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring - - 1.30.247.501/02xx 1.30.247.
RAFIX 22 QR RAFIX 22 QR twin pushbutton Ø22.30 +0.40 Pict.: illuminated 2 General data Lens legends are oriented for vertical installation of the twin pushbutton. Only the signal indicator is illuminated on twin pushbuttons prepared for illumination. This area is opaque slate grey on versions which cannot be illuminated.
RAFIX 22 QR RAFIX 22 QR twin pushbutton, oval collar Ø22.30 +0.40 Pict.: illuminated Illuminability Colour of lens Legending Order no. Plastic front ring Metal front ring yes opaque green/opaque red none 1.30.241.001/22xx 1.30.241.021/2200 yes opaque green/opaque red red 0, green I 1.30.241.002/22xx 1.30.241.022/2200 no opaque green/opaque red none 1.30.241.101/07xx 1.30.241.121/0700 no opaque green/opaque red red 0, green I 1.30.241.102/07xx 1.30.241.
RAFIX 22 QR RAFIX 22 QR potentiometer drive 34.30 26.20 Ø M 22 x1 29.80 17.00 1 ... 6 Pict.: slate grey with potentiometer 2 Technical data General information Actuator Colour of handle Front ring Form of collar RAFIX 22 QR Panel cut-out to IEC 60947-5-1 Dimensions Length of collar Width of collar Overall height Mounting depth Mechanical characteristics Robustness min.
RAFIX 22 QR RAFIX 22 QR potentiometer drive, round collar 34.30 26.20 Ø M 22 x1 29.80 17.00 1 ... 6 Pict.: slate grey with potentiometer Panel cut-out to IEC 60947-5-1 Front ring Colour of handle Order no. metal opaque slate-grey 1.30.248.051/0000 plastic slate-grey opaque slate-grey 1.30.248.001/0700 plastic silber opaque slate-grey 1.30.248.001/0800 metal opaque black 1.30.248.061/0000 plastic slate-grey opaque black 1.30.248.011/0700 plastic silber opaque black 1.30.248.
RAFIX 22 QR RAFIX 22 QR buzzer Panel cut-out to IEC 60947-5-1 2 Technical data General information Form of lens Colour of lens Form of collar Sound RAFIX 22 QR Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole Key grid Diameter of collar Mechanical design Mounting Acoustic characteristics Sonic pressure, 1 m distance min. flat lens opaque slate-grey see order block see order block see order block see order block 9.8 mm 56.4 mm 22.
RAFIX 22 QR RAFIX 22 QR buzzer, round collar Panel cut-out to IEC 60947-5-1 Operating voltage DC Input current Sound Sonic pressure, 1 m distance min. Sound frequency 12 V 25 mA continuos beep 70 dB 1.30.249.002/0000 24 V 25 mA continuos beep 70 dB 1.30.249.001/0000 Order no. 2 Technical data see page 2 - 120 RAFIX 22 QR buzzer, square collar RAFIX 22 QR Panel cut-out to IEC 60947-5-1 Operating voltage DC Input current Sound Sonic pressure, 1 m distance min.
RAFIX 22 QR RAFIX 22 QR signal indicator Pict.: yellow 2 RAFIX 22 QR red Panel cut-out to IEC 60947-5-1 Technical data General information Form of lens Colour of lens Form of collar flat lens see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole Key grid Diameter of collar see order block see order block 9.4 mm 56.4 mm 22.
RAFIX 22 QR RAFIX 22 QR signal indicator, round collar 29.80 21.80 M22x1.5 1...6mm 22.90 9.40 Pict.: yellow Panel cut-out to IEC 60947-5-1 Colour of lens Form of collar Order no. transparent colourless round 1.74.505.501/1000 transparent red round 1.74.505.501/1300 transparent yellow round 1.74.505.501/1400 transparent green round 1.74.505.501/1500 transparent blue round 1.74.505.
RAFIX 22 QR RAFIX 22 QR contact blocks with silver contacts Pict.: Silver contacts, 1 NC, cage clamp terminals 2 Silver contacts, 2 NC, screw terminals Silver contacts, 1NC+1NO, lamp socket, 1NC+1NO General data Most of the values specified apply to all terminal versions. Any deviating values specific to the cage clamp or quickconnect version are given in parentheses ( ).
RAFIX 22 QR Accessories RAFIX 22 QR contact blocks with silver contacts, screw terminals and cage clamp terminals Description Photo Order no. Page Coupling with reference numbers 1-3-2, for contact blocks with single contacts 5.05.510.935/0000 2 - 143 Coupling with reference numbers 1/2-5/6-3/4, for contact blocks with double contacts 5.05.510.936/0000 2 - 143 Marking tag for contact blocks/lamp sockets with screw terminals 5.40.010.
RAFIX 22 QR RAFIX 22 QR contact block assembly, with coupling, without lamp socket, silver contacts Pict.: Silver contacts, 1 NO 2 RAFIX 22 QR Terminals Contact arrangement Contact materials Lamp characteristics screw terminals 1 NC Ag 1.20.124.001/0000 screw terminals 1 NO Ag 1.20.124.002/0000 screw terminals 1 NC, 1 NC Ag 1.20.124.003/0000 screw terminals 1 NO , 1 NO Ag 1.20.124.004/0000 screw terminals 1 NO , 1 NC Ag 1.20.124.005/0000 screw terminals 1 NC + 1 NO Ag 1.20.
RAFIX 22 QR RAFIX 22 QR contact block assembly, with coupling and lamp socket, silver contacts Pict.: lamp socket Terminals Contact arrangement Contact materials Lamp characteristics Order no. screw terminals 1 NC Ag BA 9 s 1.20.124.021/0000 screw terminals 1 NO Ag BA 9 s 1.20.124.022/0000 screw terminals 1 NC, 1 NC Ag BA 9 s 1.20.124.023/0000 screw terminals 1 NO , 1 NO Ag BA 9 s 1.20.124.024/0000 screw terminals 1 NO , 1 NC Ag BA 9 s 1.20.124.
RAFIX 22 QR RAFIX 22 QR contact blocks with gold contacts Pict.: Gold contacts, 1 NC, screw terminals 2 Gold contacts, 1 NO, cage clamp terminals Assembly: Gold contacts, 1NC + 1NO General data Most of the values specified apply to all terminal and cage clamp terminal versions. Any deviating values specific to the cage clamp or quick connect version are given in parentheses ( ).
RAFIX 22 QR Accessories RAFIX 22 QR contact blocks with gold contacts, screw terminals and cage clamp terminals Description Photo Order no. Page Neon lamp BA 9s (MBC/MCC), 220 V AC (red) 1.90.560.102/0000 5 - 9 LED BA 9s (MBC/MCC) superbright, white, 24 V 1.90.690.345/0000 5 - 19 Coupling with reference numbers 1-3-2, for contact blocks with single contacts 5.05.510.935/0000 2 - 143 Coupling with reference numbers 1/2-5/6-3/4, for contact blocks with double contacts 5.05.510.
RAFIX 22 QR RAFIX 22 QR contact block assembly, with coupling, without lamp socket, gold contacts Pict.: Gold contacts, 1NC + 1NO 2 RAFIX 22 QR Terminals Contact arrangement Contact materials Lamp socket screw terminals 1 NC Au 1.20.124.101/0000 screw terminals 1 NO Au 1.20.124.102/0000 screw terminals 1 NC, 1 NC Au 1.20.124.103/0000 screw terminals 1 NO , 1 NO Au 1.20.124.104/0000 screw terminals 1 NO , 1 NC Au 1.20.124.105/0000 screw terminals 1 NC + 1 NO Au 1.20.124.
RAFIX 22 QR RAFIX 22 QR contact block assembly, with coupling and lamp socket, gold contacts Pict.: Silver contacts, 1NC+1NO, lamp socket, 1NC+1NO Terminals Contact arrangement Contact materials Lamp socket Order no. screw terminals 1 NC Au BA 9 s 1.20.124.121/0000 screw terminals 1 NO Au BA 9 s 1.20.124.122/0000 screw terminals 1 NC, 1 NC Au BA 9 s 1.20.124.123/0000 screw terminals 1 NO , 1 NO Au BA 9 s 1.20.124.124/0000 screw terminals 1 NO , 1 NC Au BA 9 s 1.20.124.
RAFIX 22 QR Contact blocks with coupling, gold contacts, RJ 12 connector, integrated LED Pict.: with RJ 12 adapter 2 wiring Technical data Dimensions Length Width Height Mounting depth Mechanical design Mounting Contact system RAFIX 22 QR with LED 49.4 mm 29.95 mm 42.1 mm 62 mm snap on actuator bridgecontact self cleaning Au see order block Contact materials Contact arrangement NC contact forcibly actuated acc.
RAFIX 22 QR Contact block with coupling, gold contacts, RJ 12 connector, integrated LED Pict.: with RJ 12 adapter Wiring Contact arrangement Operating voltage AC/DC Integrated LED LED colour 1 NO 24 V no 1 NO 24 V yes white 1.20.128.012/0000 1 NO 24 V yes green 1.20.128.042/0000 1 NC + 1 NO 24 V no 1 NC + 1 NO 24 V yes white 1.20.128.013/0000 1 NC + 1 NO 24 V yes red 1.20.128.023/0000 2 NC 24 V no 2 NC 24 V yes white 1.20.128.014/0000 2 NC 24 V yes red 1.20.128.
RAFIX 22 QR RAFIX 22 QR lamp sockets BA 9s (MBC/MCC), screw terminals and cage clamp terminals with contact block 2 Technical data Dimensions Length Width Height Mounting depth without cable Mechanical design Mounting RAFIX 22 QR Other specifications Approvals Robustness Shock resistance acc. to IEC 600 68-2-27 46 mm 10 mm 39.5 mm 56.
RAFIX 22 QR Accessories RAFIX 22 QR lamp sockets BA 9s (MBC/MCC), screw terminals and cage clamp terminals Description Photo Order no. Page LED BA 9s (MBC/MCC) superbright, blue, 24 V 1.90.690.344/0000 5 - 19 LED BA 9s (MBC/MCC) superbright, white, 24 V 1.90.690.345/0000 5 - 19 Coupling with reference numbers 1-3-2, for contact blocks with single contacts 5.05.510.935/0000 2 - 143 Coupling with reference numbers 1/2-5/6-3/4, for contact blocks with double contacts 5.05.510.
RAFIX 22 QR RAFIX 22 QR lamp socket assembly, with coupling Pict.: Lamp socket with cage clamp terminals Terminals Diode and resistor screw terminals no 2 screw terminals yes clamp cage no Approvals Lamp socket Operating voltage AC/DC Lamp voltage Order no. ENEC 10/15; ULc ENEC 10/15; ULc ENEC 10/15; ULc BA 9 s 6 ... 250 V 6 ... 250 V 1.71.213.001/0000 BA 9 s 250 V 130 V 1.71.213.004/0000 BA 9 s 6 ... 250 V 6 ... 250 V 1.71.214.
RAFIX 22 QR RAFIX 22 QR lamp sockets with integrated LED, screw terminals 2 Technical data Dimensions Length Width Height Mounting depth without cable Mechanical design Mounting RAFIX 22 QR Other specifications Approvals Robustness Shock resistance acc. to IEC 600 68-2-27 46 mm 10 mm 39.5 mm 56.
RAFIX 22 QR RAFIX 22 QR lamp socket with integrated LED, without coupling Terminals Diode and resistor LED colour Max. current, IF Operating voltage Order no. screw terminals white 15 mA AC/DC 24 V 5.00.070.083/0200 screw terminals red 15 mA AC/DC 24 V 5.00.070.083/0300 screw terminals yellow 15 mA AC/DC 24 V 5.00.070.083/0400 screw terminals green 15 mA AC/DC 24 V 5.00.070.083/0500 screw terminals blue 15 mA AC/DC 24 V 5.00.070.
RAFIX 22 QR RAFIX 22 QR special accessories light grey/dark grey 2 Accessories RAFIX 22 QR special accessories Description Photo Fixing spanner for ring nut and front ring Order no. Page 5.05.800.062/0000 5 - 23 Housings for flush pushbuttons RAFIX 22 QR Short text Feature 1 Feature 2 Order no. Housings for pushbuttons, round collar, flush lens, momentary 1.30.240.601/0000 Housings for pushbuttons, square collar, flush lens, momentary 1.30.240.
RAFIX 22 QR Lenses for flush pushbuttons Pict.: yellow Short text Feature 1 Feature 2 Order no. Lens, with diffuser transparent colourless transparent red flat lens 5.04.926.008/1000 flat lens 5.04.926.008/1300 5.04.926.008/1400 Lens, with diffuser transparent flat lens yellow transparent flat lens green transparent blue flat lens Lens opaque black flat lens 5.49.263.019/0100 Lens opaque white flat lens 5.49.263.019/0200 Lens opaque red flat lens 5.49.263.
RAFIX 22 QR Front ring Pict.: metal Short text 2 RAFIX 22 QR Feature 1 Feature 2 Order no. Front ring, metal 5.45.638.015/6030 Front ring, plastic, black 5.45.639.020/0100 Front ring, plastic, red 5.45.639.020/0300 Front ring, plastic, yellow 5.45.639.020/0400 Front ring, plastic, green 5.45.639.020/0500 Front ring, plastic, blue 5.45.639.020/0600 Front ring, plastic, slate grey 5.45.639.020/0700 Front ring, plastic, silver grey 5.45.639.
RAFIX 22 QR Label holder Short text Feature 1 Feature 2 Label holder, round collar, with adhesive tape and release liner on back 50 x 30 x 3.6 mm Label holder, square collar, with adhesive tape and release liner on back 50 x 30 x 3.6 mm Order no. 5.07.620.010/0000 5.07.620.011/0000 2 Legend label to clip into label holder 5.07.620.xxx RAFIX 22 QR Short text Feature 1 Feature 2 Label for label holder, without legend, 16 x 28 x 0,9 mm Order no. 5.73.110.
RAFIX 22 QR Blanking cap Short text 2 Feature 1 Feature 2 Order no. Blanking cap IP65, ring nut, square 5.05.800.065/0000 Blanking cap IP65, ring nut, round 5.05.800.064/0000 Ring nut RAFIX 22 QR Short text Feature 1 Feature 2 Order no. Ring nut (spare part) 5.24.279.012/0100 Ring nut with claw (spare part) 5.02.420.001/0000 Lamp tester Short text Feature 1 Lamp tester 2 - 144 Feature 2 Order no. 5.03.771.678/0000 Stock items are marked by bold printed order numbers.
RAFIX 22 QR Protective cover, suitable for pushbuttons with flush lens Pict.: protective lid Short text Feature 1 Feature 2 Order no. Protective cover, latching 5.05.511.195/0000 Protective cover, auto-closing 5.05.511.194/0000 2 Marking tag RAFIX 22 QR Short text Feature 1 Marking tag for contact blocks/lamp sockets with screw terminals Control components Stock items are marked by bold printed order numbers. Feature 2 Order no. 5.40.010.
RAFIX 22 QR Insulating housing IP65 for RAFIX 22 QR Pict.: 3-module 2 RAFIX 22 QR Short text Feature 1 Feature 2 Order no. Insulating housing IP65 for 22 QR, 1-module, light grey/dark grey 100 mm 55 mm 1.20.810.201/0000 Insulating housing IP65 for 22 QR, 1-module, yellow/yellow 100 mm 55 mm 1.20.810.202/0000 Insulating housing IP65 for 22 QR, 2-module, light grey/dark grey 100 mm 115 mm 1.20.820.
