Product Instruction

③——Wireless distance charger
——Adapter
1 Connect the product to an adapter that outputs 24-31Vdc or any device with an output voltage of
24-31Vdc;
2 If the distance charging product detects that there is no equipment to be charged in the charging
area, the product will be on standby.
3 Put the device (mobile phone) to be charged directly in the charging area of the product, the
device enter the charging state, and the blue light is on;
4 After charging, the product is standby, the blue light is on, then take it away.
5 If there is a metal some-like in the charging area (the center of the coil), blue and green light
flicker alternately and will disconnect distance charging to protect equipment
三、 Product parameter:
1Product model: WCP BL 03 series Distance charging products
2Product name: Wireless distance charger
3Dimension: Length is 142mm, Width is 94.5mm, and height is 14.2mm
4Main function: distance charging launcher
5Product application: All distance charging devices under QI standard
7Charging type: One-to-one charging in corresponding area
8Input voltage: 24-31Vdc
9Launch distance: 15-30mm
10Charging power: 10W(MAX)
11Charging way: Induction mode
12Working frequency: 110.5—130KHz