Specifications

Product Instructions
Safety warning
In order to ensure the integrity and safety of the product, please follow the warnings
and reminders in this manual.
Be careful! Please read the safety precautions carefully:
1. During installation, try to avoid in the minefield, strong magnetic field and high
pressure area;
2. Ensure that the wiring is correct and firm, so as to avoid short circuit damaging
components and triggering fire accidents;
3. Please install the controller in a well ventilated place to ensure the appropriate
ambient temperature;
4. Please check whether the input power supply voltage of the controller meets the
product requirements, and whether the definition of the positive and negative poles of
the power supply is consistent with the product;
5. Live wiring is prohibited. After checking and confirming that the wiring is correct,
check that there is no short circuit in the power on;
6. If there is any problem, please do not repair it without permission.
If in doubt, please contact the supplier.
Product introduction
The 17 key RGB colorful lamp belt controller uses advanced microcomputer control
IC and the most advanced PWM (pulse width modulation) control technology, which
is used to control all kinds of LED lamps and lanterns; it can control most of the four
wire RGB LED colorful lighting products on the market.
The 17 key RGB colorful light belt controller can control 22 kinds of dynamic modes
and 20 kinds of static colors. Within the effective distance, it can send control
commands through the RF remote controller to control the function change, speed
adjustment, brightness adjustment, static color selection and various dynamic light
change effects