User`s guide

RAELink3 User’s Guide

Note: Upon powering on, the RAELink3 automatically

searches for the primary Bluetooth device indicated by the

asterisk in memory.

4. The two units connect and exchange ID numbers. The ID

number of the monitor is shown below the icons.

5. They are now connected.

14 Connecting A RAELink3 Remote

Via Cable

Connect a portable gas monitor (PGM) such as a ppbRAE Plus, MiniRAE

2000, or MultiRAE Plus to the RAELink3 configured as a Remote using

the optional Portable Coiled Cable (part number 400-0189-000).

• Connect the serial cable’s 4-pin circular connector to the monitor.

(Third-party sensor or detector units require a cable that comes with

the specifically configured RAELink3.)

• Connect the other end to the RAELink3.

Note: The cable connector that fits the RAELink3’s multi-function

receptacle has a locking ring. Align the cable’s connector plug with

the RAELink3’s receptacle using the key and notch as a guide. Press