User`s guide

RAELink3 User’s Guide

asterisk next to the serial number), Step 3 can be skipped.

3. Enter Programming Mode. Press and hold [MODE] and [N/-]

for 3 seconds. This screen appears:

If you want to search for a Bluetooth-enabled monitor and

have it paired with the RAELink3, press [Y/+]. It begins

searching, and you see a screen like this:

Note: If multiple monitors will be in your network, it is

fastest to turn one monitor and one RAELink3 on at a time

for this initial pairing.

When a successful pairing is made, the screen lists the

monitor’s ID number and gives this message in the display:

Note: The primary Bluetooth connection is indicated with an

asterisk.

If you want the RAELink3 to search again, press [Y/+]. If

you want to proceed to the next step in Programming Mode,

press [N/-]. To exit to the main screen, press [MODE].