User`s guide

RAELink3 User’s Guide
12.8 Modem Configuration Menu
In this program mode, the onboard modem configuration menu can be
output and accessed via PC using a HyperTerminal program.
IMPORTANT!
Do not enter and change any parameters in this menu unless directed
to do so by authorized technical support personnel.
Note: The RAELink3 must be connected to a computer with a cable,
and a HyperTerminal program must be running.
The Modem Configuration screen is shown here:
Modem Menu
Enter?
Press [Y/+] to output the modem menu to a PC, or press [N/-] to skip
to the beginning of the programming menus
Alternatively, you can press [MODE] to exit Programming Mode.
13 Connecting A RAELink3 Remote
Via Bluetooth
When you turn on a RAELink3 modem configured as a Remote, and
its Bluetooth Power Control is set to “on,” the RAELink3 can
communicate wirelessly with a portable gas monitor (such as a
MiniRAE 3000, or ppbRAE 3000).
29