User`s guide

RAELink3 User’s Guide

used in emergency situations when there is no time to charge the Li-

ion battery pack.

To insert batteries into the adapter:

1. Remove the three Philips-head screws to remove the battery

(alkaline or rechargeable).

2. Turn over the alkaline battery adapter and remove the two

Philips screws.

3. Lift off the cover (there are two small indexing tabs at the end

opposite the two screws).

4. Insert five fresh AA batteries as indicated by the polarity

(+/-) markings.

5. Replace the cover. Replace the two Philips screws.

6. Set the alkaline battery adapter into the RAELink3.

7. Tighten the three Philips screws.

IMPORTANT!

Alkaline batteries cannot be recharged. If you place the RAELink3 in

its Charging Cradle, the alkaline batteries will not be recharged.

Note: When replacing alkaline batteries, dispose of old ones properly.

Note: Do not mix old and new or different types of batteries. Do not

change batteries in hazardous locations.