User`s guide

RAELink3 User’s Guide

5.2 Replacing The Li-ion Battery

1. Turn off the instrument.

2. Located on the rear of the instrument are three screws. Loosen all three

screws, and lift the battery out of the RAELink3. Remove the battery

pack from the battery compartment by lifting it out.

Loosen

Screws

Lift

Battery

Remove

Battery

3. Replace a fully charged spare battery pack inside the battery

compartment. Make sure the battery pack is oriented properly

inside the compartment.

4. Press the battery into place with your hand, and then tighten the

three screws.

5.3 Alkaline Battery Adapter

An alkaline battery adapter is supplied with the RAELink3. The

adapter (part number 029-3502-000) accepts five AA alkaline

batteries (use only Duracell MN1500 or Energizer E91) and provides

approximately 12 hours of operation. The adapter is intended to be