User guide

Mesh Router User’s Guide

Note: The relay on the FMC2000 controller remains triggered until

it is cleared, either at the FMC2000 or at the Mesh Router. Also,

the word “ONLINE” on the Mesh Router flashes on and off until

you clear the relays.

10.2.3 Clear Relays

Clear relays clears all of the relays on the controller, even if only

one relay was triggered.

Select “Clear Relays” and then press [MODE] to clear the relays.

After clearing the relays, you can exit by using [N/-] to scroll down

to “Exit.” Then press [MODE].

The main screen is shown:

When the relays are cleared, the word “ONLINE” no longer

flashes on and off, and returns to its normal state.