User guide

Mesh Router User’s Guide

Step from digit to digit from left to right by pressing [MODE]. Change a

digit’s value by pressing [Y/+] to increase and [N/-] to decrease. When

you press [MODE] you see a flashing “?” after the second digit:

• Save your changes by pressing [Y/+].

• Exit without saving changes by pressing [N/-].

• Step back to the first digit by pressing [MODE].

If you have saved the channel number successfully, you see this screen:

Important! Remember that the range of allowed channels for

instruments on a Mesh Router’s network depends on the wireless modem

frequency. Therefore, you may not be able to change the channel to a

number outside of its assigned set of numbers. If you select an

incompatible channel number, you will see this screen, and then the

Mesh Router returns to the Wireless menu.