User guide

Mesh Router User’s Guide
Once the device has selected the least-congested channel and a network
is joined, this message is displayed:
9.2.4 Channel Setup
All units in a network must operate on a single channel. The available
channels vary by the internal wireless modem’s frequency, and channel
ranges are set by Honeywell Analytics to correspond with the wireless
modem frequency.
These are the modem frequencies and channel ranges:
869 MHz (for use with portable monitors and EchoView Host):
Channel 0 (channel cannot be changed)
900 MHz (for use with portable monitors and EchoView Host):
Channels 1 through 10
2.4GHz (for use with MeshGuard detectors):
Channels 11 through 26
Note: You can use “Form Net” to automatically have the Mesh Router
select the least-congested channel.
Scroll until “Channel Setup” is selected.
Press [MODE] to view or change the channel. The range of available
channels is shown in parentheses. The screen also shows the channel
number, with the cursor blinking on the first digit:
29