User guide

Mesh Router User’s Guide
Six choices (including Exit) are available:
• LCD Contrast
• Serial Number (read-only)
• Firmware Version (read-only)
• Factory Reset
• Edit Password
• Exit
To make a selection, scroll until the circle to the left of your choice is
black, and then press [MODE].
Note: If you do not make a selection in 60 seconds, it automatically exits
to the main screen.
9.1.1 LCD Contrast
The display’s contrast is adjustable via this menu. To access it, press
[MODE] when its name is highlighted (dark circle):
The contrast value is shown in the display. Step through the digits from left to
right by pressing [MODE]. Change a digit’s value by pressing [Y/+] to
increase and [N/-] to decrease. After the third digit, you see a flashing “?”
• Save your changes by pressing [Y/+].
• Exit without saving changes by pressing [N/-].
• Step back to the first digit by pressing [MODE].
21