User guide

Mesh Router User’s Guide

When you have successfully entered Programming Mode, you see

this screen:

Note: If you do not make a selection in 60 seconds, the Mesh Router

automatically exits to the main screen.

Press [Y/+] or [N/-] to scroll to “Settings,” “Wireless,” or “Exit.” Then

press [MODE] to select your choice.

Settings provides information about your instrument. Some screens are read-

only (you cannot edit them), but other screens allow you to change settings.

Wireless consists of parameters you can set/change that affect wireless

functionality, network configuration, etc.

Settings include some read-only information (Serial Number and Firmware

Version) and some settings that you can change.

Press [Y/+] to scroll up or [N/-] to scroll down.

Note: The next screen contains additional options:

Note: The scrolling “wraps,” so once you reach the first or last item, it

starts scrolling through the items again.