User`s guide

FA-200 Alarm Bar User’s Guide
7 Troubleshooting
Problem Possible Reasons & Solutions
Siren inoperative Reasons: Wiring problem.
Alarm level set too low at
controller.
Solutions: Make sure cable is connected
to controller.
Make sure cable is not
damaged.
Check siren horn for
obstruction.
Test relay in controller.
Strobe light
inoperative
Reasons: Wiring problem.
Alarm level set too low at
controller.
Strobe light is damaged.
Solutions: Make sure cable is
connected to controller.
Make sure cable is not
damaged.
Check siren horn for
obstruction.
Test relay in controller.
Call Technical Support at +1
408-752-0723 or toll-free at
[phone]
Wrong strobe
light during
alarm
Reasons: Relay wiring problem.
Reasons: Check that correct relay is
wired to appropriate strobe
light.
11