User guide

EchoView Host User’s Guide
9.1 One Monitor In Alarm
When a monitor on the network goes into alarm, the LEDs flash and the
buzzer sounds. In addition, the circle to the left of the identifier changes
to a star:
Regardless of where the monitor is in the list, when that monitor goes
into alarm, it automatically moves to the beginning of the list and the
circle next to it changes to a star.
9.2 Multiple Monitors In Alarm
If any other monitors on the network go into alarm while one is already
in alarm, the circle accompanying second monitor in alarm also changes
to a star. However, if the monitor is not the one currently selected, the
star is unfilled:
To view a monitor’s data:
Scroll up or down through the list of monitors by pressing the [Y/+] or
[N/-] key. As the selection advances down the list, each subsequent circle
or star is filled (black).
Note: Only one monitor can be selected for viewing at a time.
When the icon of the monitor you want to view is highlighted, then you
can make your selection.
36