User guide

EchoView Host User’s Guide
• Save your changes by pressing [Y/+].
• Exit without saving changes by pressing [N/-].
• Step back to the first digit by pressing [MODE].
If you have saved the channel number successfully, you see this screen:
Important! Remember that the range of allowed channels for
instruments on a EchoView Host’s network depends on the wireless
modem frequency. Therefore, you may not be able to change the channel
to a number outside of its assigned set of numbers. If you select an
incompatible channel number, you will see this screen, and then the
EchoView Host returns to the Wireless menu.
8.2.5 Exit
To exit Wireless and return to the main Programming Menu, scroll until
“Exit” is shown:
With “Exit” selected, press [MODE]. The EchoView Host now returns to
the Programming Menu screen.
34