User guide

EchoView Host User’s Guide
6 Operation
When turned on, the EchoView Host radio is always turned on and
listening for remote units.
Whenever you start EchoView Host, it automatically tries to form a
network with remote wireless devices configured to communicate on the
same PAN ID and Channel.
Make sure the battery with sufficient charge is installed before operating
the EchoView Host. Refer to page 40 for information on battery
installation and replacement.
6.1 Turning The EchoView Host On
Hold down the [MODE] key and release it when the EchoView Host
display and LED lights light up. The display indicates that the unit is
now on:
During startup, the display shows the firmware version:
Next, it shows the firmware’s build date and time:
This is followed by the Unit Mode and Modem Type:
16