Users Manual

Status Percentage Indication or Alarm
Notes when charging with an IntelliDoX:
l The auto-power is on if the device is inserted into an IntelliDox module.
l If the battery is low, the device will auto-power on after the battery capacity exceeds.
l The auto-power is off if there is no communication with the IntelliDox for five minutes.
l For further information, refer to the IntelliDoX user Manual.
Charge the battery via the USB Charger
1. Press and hold the button to deactivate the detector.
2. Plug the USB charger into an USB port.
3. Attach the charging adapter to the charging Port.
Charge the battery via the Cradle Charger
1. Deactivate the detector.
2. Insert the detector into the detector bay and press down firmly on the detector to ensure
contact between the detector and the contact pins. The detector can be activated during
charging.
3. After charge is complete, the battery icon flashes green.
4. Remove the detector.
Note: For further information, refer to the Multi-Unit Cradle Charger User Manual.
BW Icon 25 User Manual