User's Manual

For Internal Use Only
nn.
0x00 00 00 00 00 00 ff fe means
that STD or RTR do not have
parent.
LAST_HOP_RSSI
Use on:
RTR
STD
Both 0x7B None 0x7C RSSI(1) Get RSSI percent, the higher, the
better.
Best: 240
Worst:0
RTR get next hop rssi;
STD get parent rssi.
SET_DEBUG_PRIN
T
Use on:
GTW
RTR
STD
Both 0xFE 00,Disa
ble
01,Enab
le
0xFF None Set display debug information
enable/disable.
The default setting is disabled.
GET_FWVERSION
Use on:
GTW
RTR
STD
Both 0x4C None 0x4D Fw Version
and Build
Time[30]
Return fw version and build time,
for example
[BMv1.00 Feb 14 2011
10:11:11], this mean fw version is
V1.00 and build is on Feb 14
2011 10:11:11.
SET_CMDBATCH
Use on:
GTW
RTR
STD
RAEMeshII 0xAC 00,
Disable
01,
Enable
0xAD None Enable or disable command
batch function. If enable, modem
will not reset automatically after
change panid, channel, power,
eui, region ， receiver and join
permission. They will take effect
after reset manually.
Batch function will disable after
reset.
GET_CMDBATCH
Use on:
GTW
RTR
STD
RAEMeshII 0xAE None 0xAF 00,
Disable
01,
Enable
Return command batch
configuration.
SET_BOOTLOADE
R
Use on:
GTW
RTR
STD
Both 0x56 None 0x57 None Make modem into bootloader
mode and wait for new app
image.
SET_PMTJOIN
Use on:
GTW
RMII 0xB0 0x01,
enable;
0x00,
disable
0Xb1 None This command can disable or
enable Coordinator or RTR’s join
network permission. If modem
disable joining permission, it
forbid
any modem joining attempt
.
GET_PMTJOIN
Use on:
GTW
RMII 0xb2 None 0xb3 0x01,
enable;
0x00,
disable
Return status that whether
modem permit joining network
attempt from RTR or STD
Caution: RCM will save corresponding command data of AT command into its persist data server if this
command cause “Reset automatically”, it will take effect after reset.