User's Manual

For Internal Use Only
Table1 RAEMesh and RAEMeshII Difference
Item
RAEMesh
RAEMeshII
Description
Hardware MCU: ATMEGA128L
Radio: EM2420
MCU: ATMEGA1281V
Radio: AT86RF212,
AT86RF230, AT86RF231
N/A
Stack Ember Zigbee Stack Atmel Bitcloud N/A
Specification Zigbee 2004 Zigbee Pro Owing to the difference of specification, RAEMesh
and RAEMeshII can’t inter-communication
Power Failure Support Un-support In RAEMesh, all device can save their child or
neighbor table into eeprom.
RAEMeshII can’t support this feature, so they
should re-form or re-join by themselves after
reset.
RSSI Router/RTR update
RSSI when it receive
every frame.
Router/RTR read next
hop’s RSSI.
Next hop is that Router/RTR send frame to GTW
through next hop’s routing.
Many-to-one
routing(MTOR)
Support Un-support In RAEMesh, GTW manage MTOR periodically
and automatically.
In RAEMeshII, Router need to do route discovery
and maintenance by themselves.
EUI Set it on RangeTest. Set it on application
firmware.
N/A
Transmission
power
Always is maximum. There are three level to be
choose.
In RAEMeshII, high, medium and low represent
different txpower on different platform.
Bootloader Provide by Ember Provide by Atmel N/A
Warm up time time scale of
milliseconds
More than five seconds N/A