User's Manual

For Internal Use Only
GET_REGION Use on: GTW RTR STD
RMII RW
0xA6 None 0xA7 Region(1) Get modem setting of region.
GET_TRAIL_INFO Use on: GTW RTR STD
RMII 0xA8 None 0xA9 NWK_INFO[16] Use this command to get modem trail information.
BYTE0: modem reset count. This count should be increased if any reset occur.(0~255) BYTE1: reset reason.
0x00 =
UNKNOW
,
0x01 = EXTERNAL, 0x02 = POWERON 0x03 = WATCHDOG, 0x04 = BROWNOUT, 0x05 = JTAG, 0x06 = WARM
BYTE2: network depth(0~15)
BYTE3~BYTE15: reserved.
SET_DEBUG_PRINT Use on: GTW RTR STD
RM RMII
0xFE 00,Disable
01,Enable
0xFF None Set display debug information enable/disable.
The default setting is disabled.
SET_CMDBATCH Use on: GTW RTR STD
RMII 0xAC 00,
Disable 01, Enable
0xAD None Enable or disable command batch function. If enable, modem
will not reset automatically after change panid, channel, power, eui, regionˈ receiver and join permission. They will take effect after reset manually.
Batch function will disable after reset.