User's Manual

For Internal Use Only
3) Command Sets
Command Name
Effect
Area
CMD
Code
CMD Data
(bytes)
Resp
onse CMD Code
Response CMD
Data(Bytes)
Description
NETWORK_STATUS Use on: GTW RTR STD
RM RMII
0x20 None 0x21 STATUS(1) Return the radio’s network status
0x00: NO NETWORK 0x02: JOINED NETWORK. Host controller or instrument should call it periodically with certain duty cycle to check the network status.
SEND_MSG_UNI Use on: GTW RTR STD
RM 0x26 DestAdd(2)
RCS Pack(x)
0x27 None Send message in Zigbee address mode.
DestAddr 0x0000 ->to coordinator 0x0001~0Xfff0 ->to STD or RTR 0xfff1~0xfffb –reserved 0xfffc ->all RTR in network 0xfffd ->all receiver on in network 0xfffe ->reserved 0xffff ->all modem in network RCS Pack(x) must be compliant with RCS format.
GET_MODULE_TYPE Use on: GTW RTR STD
RM RMII
0x2A None 0x2B Type(1) Return the radio’s type.
Type definition: 0: Bluetooth 1: coRE3-433MHz 2: coRE3-868MHz 3: coRE3-915MHz 4: ZcoRE3-2400 5: UART to Ethernet 6: UART to RS485 7: RM2420 8: RM900