User's Manual

Revision: June 2, 2011
Reset.
RST: Pin3 Active Low.
PC communication
Please has your serial port debug software installed on the PC. For example: sscom32.exe
Microsoft Hyper Terminal is not recommended for this application because it is not good to send characters and
commands in Hex.
Base on correct setting and connection, you will see following display on your screen when power is applied.
GTW:

[%A ]RAEMESH-II RM2400A 8MHz
FwVer:1.10.0.03 on Oct 29 2010 14:16:08
Type: Coordinator/Gateway
EUI: 0001000024006001
Channel: 0x10
TxPwr: High
PanId: 0x0026
RTR:
[%A

]RAEMESH-II RM2400A 4MHz
FwVer:1.10.0.03 on Oct 29 2010 14:17:15
Type: FFD/Router
EUI: 0001000024006001
Channel: 0x10
TxPwr: High
PanId: 0x0026
STD

[%A ]RAEMESH-II RM2400A 4MHz
FwVer:1.10.0.03 on Oct 29 2010 14:17:15
Type: RFD Sleep Sensor
EUI: 0001000024006001
Channel: 0x10
TxPwr: High
PanId: 0x0026