User's Manual

RAEMesh2 User Manual
Doc.No:
Originator: kren
Page 2 of 21
Data: 2014-3-18
Revision
Date
Comments
Author
0.1
11/28/2008
Initial
Alven
0.2
12/1/2008
Add “Radio Core Setting Procedure”
Alven
0.3
1/4/2009
Add “Fuse config”, “Firmware programmer”
Alven
0.4
1/5/2009
Add “Soft Reset” command
Alven
0.5
3/26/2010
Add “Reset reason” command
kren
0.6
4/22/2010
Add description about TXPOWER and
Channel setting
kren
0.7
5/20/10
Add START_ROUTING command.
Change SET_FACTORY_RST for RM2400
kren
0.8
5/25/10
Add RAEMesh and RAEMesh-II difference,
CHG START_ROUTING to
SET_ROUTEINTERVAL, add
GET_ROUTEINTERVAL and SET_REGION.
kren
0.9
8//17/10
Modify ModuleType definition.
kren
1.0
10/14/10
Add modem longest startup time;
Add modem longest packet length from SOP
to EOP; rename “RFD” as “STD”,
rename “FFD” as “RTR”, rename
“Coordinator” as “GTW”.
kren
1.1
11/19/10
Error, best rssi of at command response is
240, not 100.
kren
1.2
01/31/11
Add new command, GET_FWVERSION
kren
1.3
03/25/11
Add new commands, SET_CMDBATCH and
GET_CMDBATCH
kren
1.4
04/07/11
Modify GET_PARENT_ID definition.
Modem return 0x5b 24 27 5d when it transmit
a pack and get acknowledge successfully.
kren
1.5
6/28/2011
Add SET_BOOTLOADER
kren
11/25/2011
Add bootloader section
kren
5/8/2012
Add RM900A module type.
Add SAM7X RAELoader Section
Add RM900A low temperature current
comsumption.
kren
5/23/2012
Add RM2400, RM2400M, RM900AM, Wifi and
Cellular modem type.
kren
8/16/2013
Modify FACTORY_RESET.
kren
9/23/13
Add GET_TRIAL_INFO
kren
1/23/14
Add Wi-Fi related command
Wu Wei
2/18/14
Add three commands, SYS_CTRL_GET,
SYS_CTRL_SET, SEC_KEY_SET
kren
04/03/14
Delete Wi-Fi related command
Wu Wei
4/3/2014
Add GET_NEIGHBOUR_LIST
kren