User's Manual

For Internal Use Only
SET_BOOTLOADER
Use on:
GTW
RTR
STD
RM
RMII
0x56
None
0x57
None
Make modem into bootloader mode and wait for new app
image.
SYS_CTRL_SET
RMII
0x58
System Control Word,
B[3]…B[0]
0x59
00 – failed
01 – success
System Control Word.
Bit0: Roaming function, 1 – enable; 0 – disable;
Bit1: pending, AES128 security, 1 – enable; 0 – disable;
Bit2: Receiver setting of RFD; 1 – always on when idle; 0 –
power saving mode;
.
.
.
Bit31: reversed;
SYS_CTRL_GET
RMII
0x5A
None
0x5B
System Control Word,
B[3]…B[0]
Get System Control Word.
SEC_KEY_SET
RMII
0x5C
KEY[15]…KEY[0]
0x5D
00- failed
01- success
Set AES-128 key for application encrypt/decrypt.
GET_NODE_INFO
Use on:
GTW
RTR
STD
RM
RMII
0x60
None
0x61
UID(8)
Channel(1)
Power(1)
PAN ID(2)
Get the node information: UID, Channel, Txpower level,, PAN
ID,
GET_APPNODE_INF
O
Use on:
GTW
RTR
STD
RM
RMII
0x6C
None
0x6D
UID(8)
Channel(1)
Power(1)
PAN ID(2)
Get the application information: UID, Channel, Power, PAN
ID. If the network is not connected, the GET_NODE_INFO will
return wrong information, and then use this to get what we
set.