User's Manual

QRAE 3 User’s Guide
29
3. Press [MODE] to scroll from “On” to “Off.”
4. Press [Y/+] to select “Off.”
5. Press [MODE] to select “Exit.”
6. Press [Y/+].
The screen says “Apply Settings” and then goes to the Wireless Menu. Roaming is now off,
and the “PAN ID” menu item is now visible and selected.
8.3.6.3. PAN ID
The QRAE 3 and any other devices that you want to connect wirelessly must have the same PAN
ID. Note: When Roaming is on, “PAN ID” is not shown in the Wireless menu. You must turn off
Roaming to make the “PAN ID” menu item visible and accessible.
1. With “PAN ID” selected in the Wireless menu, press [Y/+] to select it.
2. Press [Y/+] to increase the number and [MODE] to advance to the next digit.
3. After moving to the last digit and making changes, press [MODE].
• Press [Y/+] to save the change.
• Press [MODE] to undo the change.
8.3.6.4. Channel
The QRAE 3 and any other devices that you want to connect wirelessly must be operating on the
same channel.
1. Press [Y/+] to increase the number and [MODE] to advance to the next digit.
2. After moving to the last digit and making changes, advance to “OK” and press [MODE]
to save the change, or advance to “Cancel” and exit to “Join Network” without saving the
change.
8.3.6.5. Join Network
You can tell the QRAE 3 to automatically join a network. The PAN ID and Channel are shown
for reference (if either is incorrect, you can change it, as described above). Press [Y/+] to join or
[MODE] to advance to “Interval” without making a change. Note: If Roaming is turned on,
instead of a PAN ID number, you see “- - -”.
While it is searching for a network to join, the display shows this message:
Joining Network…
If it is unsuccessful, you will see this message:
Failed To
Join Network
Check your other settings, as well as those of the network you are trying to join.
You can press [Y/+] to retry or [MODE] to exit without joining a network.